New Mustang meets old style !
Here is the latest Mustang concept to roll out of Auto Kraft in Lincoln, Nebraska, (We are a custom/ restoration shop that have been involved with building custom Mustangs and other Fords since the late 80's). The Reversion Mustang is seen here at the SEMA show 2011 where it was a crowd stopper! Based on a brand new 2011, then very carfully cut apart and new vintage aftermarket sheetmetal from Dynacorn was painstakingly reworked to fit the substructure of the new Mustang. Once the desired look was achieved by cutting and moving different section of the panel around to make it flow with smoothly, then a lot of careful welding was done. All the new panels are finished off on both sides carefully welded to the body shell. The qrt extensions and headlamp buckets are simply made from scratch sheetmetal hand formed and tig welded and made to bolt on as if they were factory parts.
This project belongs to and is the handy work of one of a 23 year old craftsman named "Johnny Sparks" a recent trainee and employee of our shop here in Lincoln. I helped John with the design aspect of the build and a little of the work but 90 percent is done by John. There is so much more to this build then meets the eye that it would take a complete book to explain it all! thanks to all the companies that jumped in to add support to the build, Dynatech headers, SCT flash tuner, JLT true cold air, Late Model Restoration supply, Bassani exhaust, APR Carbon, Speedway Motors help make this a stand out car But I hope some of you out there like it!