trick flow or holley?

[blackcrystal90]

i am going to be doing work on my engine and i wanted some opinions. i was planning on going with trick flow heads, holley intake manifolds and an f cam. any suggestions on this set up and also what push rods and rokers?

 

[NIKwoaC]

I'm assuming you're talking about Twisted Wedge 170s and the SysteMax 2 intake? If so, those are solid components. However, I suggest you look into doing something other than the F cam. There are much better options out there in cams these days. The FRPP alphabet cams are obsolete and outdated.

 

[blackcrystal90]

okay thanx. looking into a stage 2 cam.

 

[2vNotch]

Id go trickflow complete top end kit (heads, intake, cam, etc) if ur buying new parts

 

[Boosted92LX]

Id go trickflow complete top end kit (heads, intake, cam, etc) if ur buying new parts

I'll agree with that on the intake. The track heat intake numbers look better imo.. On a cam you might want to make some phone calls and get an opinion from a pro. They can usually get you a grind that jives perfectly with your setup, making more hp..

 

[Rick 91GT]

Whats the rest of the combo? Stock shortblock/pistons? The TFS kit is hard to beat for the cost, I can put it together without the cam and put what ever you need together cam profile wise...save you some money as well.

 

[blackcrystal90]

i was just planning on a top end kit that i would put together myself with new parts but looking for better combo that exceeds the tickflow top end kit a bit. fairly new at this so trying to get all that parts/combo together before i purchase, going to a complete rebuilt to a 306. looking to get between 350-400 rwhp

 

[blackcrystal90]

im planning on turbocharging it in the future if it makes a diff.

 

[FoxGT87]

Maybe the F cam would be a good choice for you. It isn't a bad cam for N/A and it is a really good cam for boosted applications.