- Dec 11, 2011
- 16
- 0
- 1
ok heres what i have 1989 5.o with an aod
stock bottom
trick flow stage one cam
cast gt 40 heads (tfs spring upgrade) 3 angle grind and surffaced
gt40 cobra intake with 1 in spacer
bbk adjustable fpr
stock injectors
65 mm tb
bbk cold air
stock maf i have a 73 mm but not on it wouldnt idle right with it
bbk headers and mid pipe with high flow cats
NO smog
Problem runs good but when you get on it and you get around 3500 to 4000 it skips a touch not bad but i know im losing power
#2 i have a ticking in my rockers the intake side are fine but all the exaust rockers are lose with the small shims but to tight with no shim
any suggestions
ok now questions do i need to upgrade to #24 injectors and what about the fuel pump
also what should i set the fp at
i plan on getting it tuned but want to get it close before i go also any sugestions one things i need to know or do before i go
thanks for your help
stock bottom
trick flow stage one cam
cast gt 40 heads (tfs spring upgrade) 3 angle grind and surffaced
gt40 cobra intake with 1 in spacer
bbk adjustable fpr
stock injectors
65 mm tb
bbk cold air
stock maf i have a 73 mm but not on it wouldnt idle right with it
bbk headers and mid pipe with high flow cats
NO smog
Problem runs good but when you get on it and you get around 3500 to 4000 it skips a touch not bad but i know im losing power
#2 i have a ticking in my rockers the intake side are fine but all the exaust rockers are lose with the small shims but to tight with no shim
any suggestions
ok now questions do i need to upgrade to #24 injectors and what about the fuel pump
also what should i set the fp at
i plan on getting it tuned but want to get it close before i go also any sugestions one things i need to know or do before i go
thanks for your help