What kind of power can a 2v expect from patriot stage 2 heads, a decent cam and a PI intake, Other mods would be pullies, Long tube headers, full catback, and a cold air intake? Also what cams would be best for NA or Nitrous? Is it worth looking into anything other than the stock PI intake or is that still one of the best options.
Patriot Heads
- Thread starter tjmaxx
- Start date
-
Sponsors (?)
vertigasen
Active Member
Ok, Ill bite. I hate the "how much will I make" question, but here goes.... 300 is possible, but there are a lot of variables. You might make 300+ or less than 300, I have seen it go both ways. I expected to make 700+, I made 666. That was on a mustang dyno, a month later it put down 718 on a dynojet.
Here are some things you need to ask....what cam do I want....will it hit my pistons? Check with Modular Head Shop, there you can get all the head/cam info you will ever need.
The PI intake is good for now with what you are doing. If you start trying to go with a bigger cam, a forged lower to spin the crap out of it, then sure, there are some better intakes out there.
Here are some things you need to ask....what cam do I want....will it hit my pistons? Check with Modular Head Shop, there you can get all the head/cam info you will ever need.
The PI intake is good for now with what you are doing. If you start trying to go with a bigger cam, a forged lower to spin the crap out of it, then sure, there are some better intakes out there.
1fun281
Member
Similar threads
