there it is guys can i run an e303 cam with a 347 stoker crank....is there a better cam for that set up or should i go 331? i want to stroke my pony whats the best way. input please! Thanks Guys
Engine Can I Run An E303cam W/ A 347 Stroker Crank?
- Thread starter BradleyMustang3
- Start date
-
Sponsors (?)
Yes you can
Depends on how you treat it
Why on earth would you go to the trouble of building(?) a 347 and then throw an E-cam into it?
Go to FTI's website and fill out their cam form.
Depends on how you treat it
Why on earth would you go to the trouble of building(?) a 347 and then throw an E-cam into it?
Go to FTI's website and fill out their cam form.
Yes, you can run the E303 cam in a 347 but why would you want to do that except if you desperately need to save money by avoiding a cam change? A custom cam is the way to go and I'm sure Ed Curtis, Jay Allen, or Buddy Rawls would fix you up with one.
I wish the Alphabet cams were never even invented. Don't E-cam a 347 please, don't B-F for that matter. You want a custom cam for that motor. Mine has a Comp custom split duration .542 / .562 Lobe 114, it's sick.
A 347 won't sound like this with an E-cam.
http://s19.photobucket.com/albums/b187/jpjr50/?action=view¤t=CIMG0446.mp4
A 347 won't sound like this with an E-cam.
http://s19.photobucket.com/albums/b187/jpjr50/?action=view¤t=CIMG0446.mp4
Mrstangerbanger
New Member
IF you run 302 parts on a 347 you will get 302 rwhp numbers lol .. Your heads ,cam and intake need to be upgraded with a 347 to get that 400 rwhp mark
yeah i have edelbrock performer heads. i want to go with a trick flow street intake and now that i see all the input a custom cam...are there any cams i can just find on the web that would work well with a 347? and where is that stroker crank going to put me with the proper cam in rwhp. Thanks Guys
+1000 on what everyone is telling you. If you don't have the money to spend on a 347 top end, don't bother wasting money on a 347 bottom end. E cams are really only good as nostalgic table legs for your living room. Edelbrock performer heads barely qualify as 302 heads.
Kurt
Kurt
I would say AFR185s or Trick Flow 185s. There are a lot of good mid level heads that will work really well.
Kurt
Kurt
I ran AFR 185's, Holley Systemax Intake, Custom Comp Cam, 70MM TB, Pro-M 80MM Mass Air, 30lb Injectors, 1-3/4" Ceramic Long Tubes w/ 3" Collector, MAC 3" Prochamber, MAC 3" Cat Back. Over do it on your 347 and it will respond with huge numbers. Put 302 stuff on a 347 and you'll get stock numbers.
Similar threads
