New Pics Of Dhg Bullitt 4113!

[stprorolla49]

I went out on Saturday between battling my fan issues and shot a few pics after I detailed it. I didn't have time for a complete correction, just a wash/clay/wax, although it really doesn't need it...I'm just anal as hell. Here's my favorite pics from the shoot, enjoy!

Shot with a Canon Rebel XSi, 18-55mm kit lens, edited in Adobe Lightroom

 

[slayerripkdc]

Looks good but you should always Polish after you clay the finish! Claying will cause light scratches and marrying in the paint which the polish will take out.

 

[stprorolla49]

Thanks! Yea I know, I just didnt have time. The paint has very few swirls, and almost no marring since I clay it so often. I had my Porter Cable and polishes with me, just didn't have time to do it all.

 

[slayerripkdc]

Thanks! Yea I know, I just didnt have time. The paint has very few swirls, and almost no marring since I clay it so often. I had my Porter Cable and polishes with me, just didn't have time to do it all.

I hear ya. I don't feel like pulling the Porter Cable out sometimes either. Takes up the entire day lol. Lets see that supercharger

 

[Deleted member 38176]

 

[stprorolla49]

I hear ya. I don't feel like pulling the Porter Cable out sometimes either. Takes up the entire day lol. Lets see that supercharger

Ask and you shall receive...

And a quick cell phone shot with the new overflow tank and rad cover...

 

[Deleted member 38176]

Stprorolla, PLEASE give me the specs on your CXracing intercooler. What size IC? What kind of tubing did you get (how many 90 degree albows, 45 deg. elbows, etc)? Are you running a blow-thu or draw-thru maf? Any information is GREATLY appreciated.

 

[stprorolla49]

Stprorolla, PLEASE give me the specs on your CXracing intercooler. What size IC? What kind of tubing did you get (how many 90 degree albows, 45 deg. elbows, etc)? Are you running a blow-thu or draw-thru maf? Any information is GREATLY appreciated.

There is a ton of info that I collected for this build, and it is all documented in my build thread on SN95Forums.com. Here's the link to the thread starting where I began collecting parts. All the info about the intercooler, piping, blow thru setup, etc is in there.

http://sn95forums.com/showthread.ph...-*Update-8-4-12-Fresh-Gauge-Rings!-quot/page5

Good luck! It was a fun build, frustrating at times, but the end result came out great!

 

[Deleted member 38176]

There is a ton of info that I collected for this build, and it is all documented in my build thread on SN95Forums.com. Here's the link to the thread starting where I began collecting parts. All the info about the intercooler, piping, blow thru setup, etc is in there.

http://sn95forums.com/showthread.ph...-*Update-8-4-12-Fresh-Gauge-Rings!-quot/page5

Good luck! It was a fun build, frustrating at times, but the end result came out great!

Oh yes! Awesome, thanks.

 

[slayerripkdc]

Looks good with the Bullit Intake!

 

[Kilgore Trout]

That car is perfect, Steve McQueen would approve.

 

[Kornnut]

What rad cover and tank is that? The car overall looks fantastic.

 

[stprorolla49]

Thanks everyone!

What rad cover and tank is that? The car overall looks fantastic.

Thanks man, the rad tank is a Moroso piece that accepts the stock cap, and the rad cover is an SVE piece from 50Resto. The tank fit beautifully, the cover is a POS! I spent a ton of time modifying it to make it work, and it still doesn't sit perfectly. Might just be a bad part, and 50Resto did make good on it, but I personally like the UPR one better. They just didn't have any in stock because they were switching manufacturers.