Turbo Install Complete, Not Running Right Now

[MY 85 GT]

No I got all my parts from poweraddersolutions

I understand that part is that the MAF that goes in the pipe you have to weld?...i hear they have problems with the calibration..If its one you need to cut the pipe and clap did you try clocking it?>..maybe its not reading the airflow right..

 

[91foxbod50]

Clocking it? Yeah it cut and weld. I might try to reverse it. Maybe it's backwards or something.

 

[2000xp8]

You can't run a chip without a dyno tune.
It's no secret that i think chips are worthless on foxes (especially under 500rwhp) and on an off the shelf i think that twice as much.

If i'm reading it right you have a pmas meter, if that's so, clocking it will fix nothing.

If it runs better without the chip, for sure you have found at least one problem.

 

[91foxbod50]

Just advice, if anyone needs poweradders go through Chris at poweraddersolutions that guy stands behind his word. Thought I'd share.

What are you talking about? Chips aren't pointless. And if so why?

 

[91foxbod50]

Resolved

 

[MY 85 GT]

Resolved

ok what was it?

 

[88LX5.Oh]

Resolved

Yes. Do tell.

 

[91foxbod50]

MAF wiring

 

[MY 85 GT]

Thats good that you found it how is it running How much boost you pushing?..what motor mods does it have what trans you running?

 

[91foxbod50]

It's running good now. Stock cam and ported e7's with gt40 tubular intake. Im not planning on going all out I just wanted to have a decent power increase. My coupe is light and it was quick before. I have a trans with a spec stage 2 clutch and billet flywheel. Tremec 5 speed

 

[gearheadboy]

Glad to hear you got her ironed out.

 

[MY 85 GT]

It's running good now. Stock cam and ported e7's with gt40 tubular intake. Im not planning on going all out I just wanted to have a decent power increase. My coupe is light and it was quick before. I have a trans with a spec stage 2 clutch and billet flywheel. Tremec 5 speed

cool any finshed pictures?...How much boost you seeing?

 

[91foxbod50]

Had some in the other thread not completely up to date but ill post some once I finish everything up.