Vacuum help please..

I just replaced my heater core on my 87 GT so I robed the dash and now I can't figure out where this line goes? Any help would be great I've searched and found many threads but I just can't figure it out thanks

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
 

Attachments

  • uploadfromtaptalk1354236621344.jpg
    uploadfromtaptalk1354236621344.jpg
    61.8 KB · Views: 78
  • uploadfromtaptalk1354236638741.jpg
    uploadfromtaptalk1354236638741.jpg
    92.5 KB · Views: 89
  • Sponsors (?)


Diagram courtesy of Tmoss & Stang&2birds

Mustang_AC_heat_vacuum_controls.gif


See the following website for some help from Tmoss (diagram designer) & Stang&2Birds (website host) for help on 88-95 wiring http://www.veryuseful.com/mustang/tech/engine/ Everyone should bookmark this site.

Ignition switch wiring
http://www.veryuseful.com/mustang/tech/engine/images/IgnitionSwitchWiring.gif

Fuel, alternator, A/C and ignition wiring
http://www.veryuseful.com/mustang/tech/engine/images/fuel-alt-links-ign-ac.gif

Complete computer, actuator & sensor wiring diagram for 88-91 Mass Air Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/88-91_5.0_EEC_Wiring_Diagram.gif

Complete computer, actuator & sensor wiring diagram for 91-93 Mass Air Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/91-93_5.0_EEC_Wiring_Diagram.gif

Vacuum diagram 89-93 Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/mustangFoxFordVacuumDiagram.jpg

HVAC vacuum diagram
http://www.veryuseful.com/mustang/tech/engine/images/Mustang_AC_heat_vacuum_controls.gif

TFI module differences & pin out
http://www.veryuseful.com/mustang/tech/engine/images/TFI_5.0_comparison.gif

Fuse box layout
http://www.veryuseful.com/mustang/tech/engine/images/MustangFuseBox.gif

87-92 power window wiring
http://www.veryuseful.com/mustang/tech/engine/images/mustang87-92 PowerWindowWiring.gif

93 power window wiring
http://www.veryuseful.com/mustang/tech/engine/images/mustang93PowerWindows.gif
 

Attachments

  • Mustang_AC_heat_vacuum_controls.gif
    Mustang_AC_heat_vacuum_controls.gif
    17.8 KB · Views: 85
Look up under the dash toward the heater box above the accelerator pedal and you should see a gold colored vacuum cannister, that is where that vacuum line should attach.