Post pics of how your foxbody currently sits

here is a few from today
IMAG1902.jpg
IMAG1903.jpg
IMAG1904.jpg
IMAG1911.jpg


where in Tucson are you?
 
  • Sponsors (?)


lol no videos, when its on the dyno I have to sit in the back otherwise it spins the tires on the dyno.

I was worried about that too, because mine's only on 275s, but they put this strap around my chute mount and strapped the back end down about half an inch or more. It didn't spin at all! It's still pretty terrifying to watch how much the car moves with it anchored in 6 places.

 
This thread has made me rather envious of some people's Mustang's. Hopefully mine will be that awesome at some point. As of now, I'm at the starting point as I just bought it only two weeks ago.

View attachment 137962
Untitled by jmbohizic, on Flickr
View attachment 137964
Untitled by jmbohizic, on Flickr

Awaiting the removal of the transmission. H-pipe, starter, and driveshaft are all out and pretty much all else in unbolted except the rear mount, the bellhousing, and the torque converter. Hopefully that little turd comes out and in goes the low mileage AOD and 2500 stall converter next weekend. Throughout the week I'll be replacing the Quarter mindow mightmare too. Wish me luck folks!
 
76ish F150?
And Clevelands are badass. I want to build a Clevor so bad

She is a '79 but has the grill from a 77 and the rest of the body is off of a 76 so good eye!

I love Clevelands and the rest of the 335 series engine family which is why I stuck with the 351M in the truck. I used the 2V heads from the Mustang's cleveland after I sourced some 4V heads.

I do have to say I love everyone's stangs. Had an 88GT that I converted to carb years ago and then sold that after I purchased a '94 SVT Cobra. I miss that car.
 
5 lug stuff... almost there:

DSCN0296_zpsc12691d8.jpg


5 months ago:

20120917_181321.jpg


wife bought me new head lights and I hit the car with some rubbing compound and polishing compound though it was about 2 weeds ago and its not looking nearly as it did when polished it.

DSCN0298_zps214901b2.jpg


DSCN0299_zpsae0e059e.jpg


DSCN0300_zpsaae2e764.jpg
 

Attachments

  • DSCN0296_zpsc12691d8.jpg
    DSCN0296_zpsc12691d8.jpg
    84.7 KB · Views: 110
  • DSCN0298_zps214901b2.jpg
    DSCN0298_zps214901b2.jpg
    73.3 KB · Views: 100
  • DSCN0299_zpsae0e059e.jpg
    DSCN0299_zpsae0e059e.jpg
    73.8 KB · Views: 107
  • 20120917_181321.jpg
    20120917_181321.jpg
    206.6 KB · Views: 100
  • DSCN0300_zpsaae2e764.jpg
    DSCN0300_zpsaae2e764.jpg
    73.3 KB · Views: 106
  • Like
Reactions: 1 users
5 lug stuff... almost there:

DSCN0296_zpsc12691d8.jpg


5 months ago:

20120917_181321.jpg


wife bought me new head lights and I hit the car with some rubbing compound and polishing compound though it was about 2 weeds ago and its not looking nearly as it did when polished it.

DSCN0298_zps214901b2.jpg


DSCN0299_zpsae0e059e.jpg


DSCN0300_zpsaae2e764.jpg
Nice! Oreilly brake fluid and masterpro gear lube! Don't forget to buy friction modifier. As far as i know, The only oil we(Oreilly) sell that has modifier in it is royal purple.
 

Attachments

  • DSCN0296_zpsc12691d8.jpg
    DSCN0296_zpsc12691d8.jpg
    84.7 KB · Views: 94
  • 20120917_181321.jpg
    20120917_181321.jpg
    206.6 KB · Views: 109
  • DSCN0298_zps214901b2.jpg
    DSCN0298_zps214901b2.jpg
    73.3 KB · Views: 81
  • DSCN0299_zpsae0e059e.jpg
    DSCN0299_zpsae0e059e.jpg
    73.8 KB · Views: 113
  • DSCN0300_zpsaae2e764.jpg
    DSCN0300_zpsaae2e764.jpg
    73.3 KB · Views: 120