Break pressure problem

[shaunspengler]

Hey guys fix one thing and something else goes wrong. Anyways i was driving and i gues one of my rear break pad fell out anyways long story i put new breaks in both sides but i think i bled out all the lines and theres no break pressure. What could i do to fix this is there a clog or what cause theres no fluid going to the rear brakes like i can open both the nipple and the bleeder and nothing comes out. So what should i do to fix it?

 

[txredgt]

Gotta bleed the master cylinder before bleeding the lines. I learned that the hard way the first time.

 

[trinity_gt]

How does a brake pad just "fall out"?

 

[Jhussey1280]

yeah gotta bleed the master cylinder first then the calipers. Go back, bleed the master cylinder then rebleed the calipers should fix the issue.

 

[shaunspengler]

Wheres the master brake cylinder is it the drivers brake caliper erh what?

 

[Jhussey1280]

The brake master cylinder is under the hood, where you put the fluid in.

 

[bullitt 736]

Why do I get the feeling the OP bled the brakes without keeping the master cylinder filled while doing so?

 

[madspeed]

go to your local parts store and get a repair manual!

 

[Kilgore Trout]

Yeah get a haynes manual and take a look at the Bullitt Archive bro, you will be able to fix this but you should have done more research before starting the task. And how does a pad fall out?