- Mar 18, 2010
- 21
- 0
- 1
Hey I encountered a problem the other day, and is driving me crazy
I rebuilt the rear in my car, put 4.10s in it, and I took the diablo tune off because i ordered a bama tuner.
Well had the car running for an hour or so to check the coolant and see how it sounded backing up and down the drive way.
well drove it 5 miles and the car shuts off and the CCRM is buzzing, a clicking noise or buzz. I was luckily able to drive it back home, but i noticed my O2 sensor plug was unplugged so I plugged that back up
But now the car will not start and the CCRM is buzzing still
I bought a new CCRM, still buzzes, I tested them in my freinds 03 mach 1 and it works fine, no buzzing.
The THEFT light is blinking rapidly and the scanner can't read the car, Says failure to read car, or turn the key to the on position but do not start.
Any ideas or where to start?
any help is greatly apperciated!
I rebuilt the rear in my car, put 4.10s in it, and I took the diablo tune off because i ordered a bama tuner.
Well had the car running for an hour or so to check the coolant and see how it sounded backing up and down the drive way.
well drove it 5 miles and the car shuts off and the CCRM is buzzing, a clicking noise or buzz. I was luckily able to drive it back home, but i noticed my O2 sensor plug was unplugged so I plugged that back up
But now the car will not start and the CCRM is buzzing still
I bought a new CCRM, still buzzes, I tested them in my freinds 03 mach 1 and it works fine, no buzzing.
The THEFT light is blinking rapidly and the scanner can't read the car, Says failure to read car, or turn the key to the on position but do not start.
Any ideas or where to start?
any help is greatly apperciated!