So the time has come to put the bottle on the old stang. I want to start with a 150 shot but intend on possibly spraying 200. What is the best and most reliable kit? Or should I just build my own?
What nitrous kit to get?
- Thread starter Tramage
- Start date
-
Sponsors (?)
Exile
Active Member
Your gonna start to spend some money once you go over 150 shot.
http://www.summitracing.com/parts/zex-82062/media/images/make/ford
If your willing to stay under 150 shot you can get a kit for half the price.
http://www.summitracing.com/parts/zex-82023b/overview/make/ford/model/mustang/year/1991
http://www.summitracing.com/parts/zex-82062/media/images/make/ford
If your willing to stay under 150 shot you can get a kit for half the price.
http://www.summitracing.com/parts/zex-82023b/overview/make/ford/model/mustang/year/1991
http://www.summitracing.com/parts/edl-70050/overview/
One of the nicest kits for the money. Designed by Steve Johnson now of Induction Solutions. These solenoids are among the best ou can buy. There plate is far better than most others out there at this price level. At the 200 hit level I would strongly recommend a separate fuel system for the nitrous along with having it properly setup and flow tested. One small mistake at this level can mean total engine destruction. Start slow and ask a lot of questions. Steel heads and a stock block = time bomb with this much nitrous..
One of the nicest kits for the money. Designed by Steve Johnson now of Induction Solutions. These solenoids are among the best ou can buy. There plate is far better than most others out there at this price level. At the 200 hit level I would strongly recommend a separate fuel system for the nitrous along with having it properly setup and flow tested. One small mistake at this level can mean total engine destruction. Start slow and ask a lot of questions. Steel heads and a stock block = time bomb with this much nitrous..
http://www.nitrousexpress.com/60040...0-100-150-200-250-300hp-with-10lb-bottle.html
Been looking at this kit
Been looking at this kit
This is a nice kit. We have the same kit on an ultra street car strapped down on the dyno as we speak. Ill let you know how we make out with it if you would like
I can't say exactly which setup jet wise is in it because the car owner wants to keep it under wraps, but if I equated it to a t shirt size it is an xxl, lol. Ill keep you posted as to the quality, dispersion, and gains vs. advertised in the next day or so when the tune gets finished up.
We dyno'd the car on motor today and setup/flowed the nitrous and everything is a go for spraying this thing tomorrow. This really is a nice kit, the plate is very well made.
http://www.nitrousexpress.com/60041...0-100-150-200-250-300hp-with-10lb-bottle.html
Have you heard anything about this kit? my buddy just became a Nitrous express authorized dealer and now I get a discount
ERM636
Founding Member
I think that may be getting into the overkill territory.. For what you are trying to accomplish you can have the same relative results with a much more inexpensive kit.http://www.nitrousexpress.com/60041...0-100-150-200-250-300hp-with-10lb-bottle.html
Have you heard anything about this kit? my buddy just became a Nitrous express authorized dealer and now I get a discount
As far as the Gemini twin, impressive results so far...
I've had good luck with the NX stuff in the past, even the Zex works well for a good solid entry level kit.
Most guys don't want to take the time or have the knowledge to properly flow and adjust the N2O like 84 is discussing....critical for proper, safe use on a bigger hit.
For a high end kit Wilson, Induction Solutions or switzer dynamics, Fulton get my vote.
I had a Wilson Pro flow 2 stage plate kit using over 600hp very nice parts....I've since switched to boost and won't look back.
Sent from my XT907 using Tapatalk 2
Most guys don't want to take the time or have the knowledge to properly flow and adjust the N2O like 84 is discussing....critical for proper, safe use on a bigger hit.
For a high end kit Wilson, Induction Solutions or switzer dynamics, Fulton get my vote.
I had a Wilson Pro flow 2 stage plate kit using over 600hp very nice parts....I've since switched to boost and won't look back.
Sent from my XT907 using Tapatalk 2
All in all this kit supports exactly what they say, and like I said before it is very well made.
