New To Forum And Have Some Questions.

glsron

New Member
Apr 28, 2013
15
1
3
Hi Everyone!! I have a 93 vert gt.. Did some mods to it.have explorer intakes, 24lb injectors 70mm throttle body, 73mm maf, 500 lift cam and a whistle that's driving me nuts.... Any ideas on what I can do.......


Thanks Ron........
 
  • Sponsors (?)


Hi Everyone!! I have a 93 vert gt.. Did some mods to it.have explorer intakes, 24lb injectors 70mm throttle body, 73mm maf, 500 lift cam and a whistle that's driving me nuts.... Any ideas on what I can do.......


Thanks Ron........

Hiya glsron... Take a look through the forum setup and try posting in the Welcome Wagon for your introduction.
 
Hi everyone.."am I in the right forum...is this where I can ask questions about my 93 vert?

Nope, you're still in the feedback and testing forum but that's ok. I've moved your posts into their own thread within Talk section of the Fox Body forums.

So now.... you're in the right place. :nice:

Ask away.
 
I have a similar issue at a certain rpm or throttle condition...haven't pinpointed it yet, but kind of think its egr or tb perhaps? (edited after above post)
Do you happen to have a BBK throttle body by chance?

And I have a BBK 70mm TB....is that a known culprit? and to think I actually worked for them at one point many years ago
 
I have a similar issue at a certain rpm or throttle condition...haven't pinpointed it yet, but kind of think its egr or tb perhaps? (edited after above post)


And I have a BBK 70mm TB....is that a known culprit? and to think I actually worked for them at one point many years ago
It's a very common problem with the BBK's. I am a lucky one and don't have the whistle, but I've heard of many cases where it was the culprit
 
It's a very common problem with the BBK's. I am a lucky one and don't have the whistle, but I've heard of many cases where it was the culprit

I cleaned the iac and got the idle back. I think I'm having computer problems engine light stays on it's pig rich burns my eye burn
how do I pull the codes out what do I need as far as tools? Help please!!