Transmission Crossmember Orientation

  • Sponsors (?)


I just installed mine (on a c4) with the large hump on the passenger side. Have not bolted the exhaust up yet. I was in the same boat as you and if memory serves, I was looking at the clearances between the humps (with large on passenger) and it doesn't look like it would fit the other way, may hit the floorboard.
 
6mc_large.gif

url


Also FYI when using a tremec just bolt in a AOD crossmember and it'll work if you don't want to cut your T5 one up and reweld.
 
Heres a question for you what size is the bolt going from crossmember to trans i need yp know that lol

its been a couple months, but iirc, i used 3/8-16 on the outboard tubes, another 3/8-16 from crossmember to mount, and either a 7/16-14 or a 1/2-13 on mount to trans (which suprised me since i thought the whole trans was metric). this was using the energy suspension mount, and i had to widen the slots on the bottom on a new crossmember (dont know if the originals are stamped bigger, but this was an frpp piece).

big hump goes on passenger side as has already been stated.