All Power Windows Not Working.

STORM ROLLING IN! My windows wouldn't work a few days ago, then mysteriously started again. Stopped again today and will not work. Power locks also won't work also none of the individual switches. Checked all fuses, have 12V at switch.
Plug test: have continuity between each, "pair" of wires on each of the respective switch plugs, and between the black wire and ground to body.
Switch test: continuity along the terminals and in each switch with it "up" and "down".
Will a bad switch itself stop all windows?
 
  • Sponsors (?)


UPDATE:
I just tested the switch with it in the car. With my meter grounded to the door or the ground wire in the plug, and everything plugged in, I do not get 12V on any button, either side, up or down. But, I DO get 12V when operating the driver window button ONLY with it unplugged from the motor, but nothing on any other button with it unplugged. I am in search of a switch. Josh at Encore Mustang Parts replied to my post on Facebook, $90 shipped.
 
LMR has switches, but I haven't seen the four button master for 'vert. I was gonna open it up and clean it, but I was more concerned with getting the windows up as it's been raining here since shortly after they quit, go figure. I did use a jumper to get them up.
 
  • Like
Reactions: 1 user
Popped the switch open today:
behe6ejy.jpg
 
It was pretty goopy in there. I cleaned out all the grease and checked the contacts. It was glued together so I had to hold it together while plugged in but it worksed. All the snap tabs broke so super glue or epoxy is in order. I'll prolly still get the switch I found and keep this one for a spare just in case.