Ok has anyone seen this done before? Doesn't seem to safe to me! I have the Granada spindles I understand but to have the brake lines like this makes no sense!
Brakes
- Thread starter Scrasauge
- Start date
-
Sponsors (?)
horse sence
15 Year Member
It looks like they took the drum brake line and bolted the disk brake line to it
I think i would get some Wilwood braided lines and replace that concoction .
I think i would get some Wilwood braided lines and replace that concoction .
Ok so I can get wilwood to make me a line to go from the drum line fitting to the disc caliper? And how long would the line need to be?
horse sence
15 Year Member
they have lines already made .I think i still have the part number ,i will see if i still have it. What does the fitting where it attaches to the caliper look like ? is it a loop with a bolt through ?
horse sence
15 Year Member
Boogie's AutoRama
New Member
- Jun 23, 2013
- 14
- 0
- 2
I put Granada brakes on my car years ago and when I saw the trouble I was going to have with the brake hoses (no inter-web back then) I picked up a double flare set and made my own hard lines out to where the Granada hose could tie in.
It was a simple job after that.
http://www.ebay.com/sch/i.html?_sac..._nkw=double+flare+tool+set&rt=nc&LH_PrefLoc=1
It was a simple job after that.
http://www.ebay.com/sch/i.html?_sac..._nkw=double+flare+tool+set&rt=nc&LH_PrefLoc=1
RacerJames
Active Member
I haven't called yet to see if they'll sell individual parts from their kits, But, CSRP has hard lines already made for this swap.
http://www.discbrakeswap.com
http://www.discbrakeswap.com
I looked at their website last night and it seems that you can order parts individually and i seen the flexibe brake line on there, thanks for the input, i will try and call them next and see about getting a set for my car.
Similar threads
