Installing A Fuel Pressure Gauge

golf4283

Active Member
May 30, 2003
1,253
1
39
Orland Park, Illinois
Can anyone let me know what kind of fuel pressure gauge I should get and where to install? my fuel rail has no provision for such a thing (unless I can somehow use it in conjunction with the return line valve in the rail.

I have EFI in my '65 Mustang. the fuel lines are all custom and I'm using AN fittings for some of it so I'm guessing I can tap into those. I just need a recommendation from someone on which gauge to get that will handle the PSI. I'm worries the car is starving for fuel but there's no way to tell without a gauge.

Thanks,
Dan
 
  • Sponsors (?)


I understand that for sure. Thats why i got sn95 rails that have a schrader valve right on the rail for a gauge mount. :D

Now you're gonna have to get creative and find a way, most likely gonna require some an fittings which arent cheap. Assume the rails have quick connects on them?
 
yea they have quick connects. I'll check craigslist for SN95 rails. I might even have one already since I'm using an explorer GT40 intake. I think the rails that were on there had the schrader valve but I was unsure of the quick connect locations interfering with the intake and accessories.
 
I have stainless steel lines running from the tank to the engine compartment.
in the engine compartment I have AN fittings converting the stainless lines to flexible steel wrapped lines. then I have AN fittings for the quick connect fittings at the fuel rail
 
They make an adaper like this that has the gauge port on ot

361-AT100200.jpg