Aem, Autometer, Innovate, all reputable brands and make a multitude of gauges, I'm sure you'll find one type you prefer
What Gauges To Install?
- Thread starter Detroiit
- Start date
-
Sponsors (?)
Again brilliant@!!!! I don't like wasting my money of eBay Chinese garbage.. so that's why I asked for the reputable companies.. I dont know my !@s from a hole in the ground.. So I do take into consideration you all's perspective.. A picture of a product can be made to like D##n good..
jetmech807
10 Year Member
Right now with me it's a toss up between AEM and Autometer. I've always used Autometer and in 20+ years have never had a problem. Folks rave about AEM too.
I run an innovate wide band in my car. MTX-L is the model. I also run autometer boost gauge , i have a oil pressure and water temp waiting to go in. I prefer mechanical when it comes to those. The autometers i have are ford motorsport they are older then me i found NOS on ebay. I love the period correct stuff. Its in my thread if you want to take a peek
mikestang63
SN Certified Technician
@madspeed That PLX unit is very nice, but I started pricing it out. $100 for the gauge but $175 for each sending unit- oil pressure, water temp, a/f ratio, etc.. By the time I'm done it's almost the same price as getting a Florida 5.0 dash set.
Thats a better option if you were planning on replacing all of your factory gauges. I for one, wanted to keep mine stock and add only those that I needed, which can all be used on one multigauge
mikestang63
SN Certified Technician
I only purchased the multigauge/afr combo pack which was $195, and then added the boost solenoid which was another $75. I can cycle between the two simply by touching the screen. Outputs can be displayed in several different configurations with 16 differnet modules available
View: https://www.youtube.com/watch?v=237sGc_NVlE#t=79
View: https://www.youtube.com/watch?v=237sGc_NVlE#t=79
I like that plx and if I was datalogging it would have been a no contest. I went with autometer units in the center dash vents. Kind of wish at this point I had flipped the stereo location and put the gauges down there.
Autometer has always been my go to. They have yet to disappoint with the quality or longevity in anything that I have owned. The PLX sure is sharp and for a sleek look would really get the job done!
f8tlfiveo
My wife likes my spool and blow-off valve.
I have a Stewart Warner boost gauge and an aem afr gauge. Neither are hooked up yet, but both look like quality units
I think the SW are such a classy gauge . Almost cockpit like . esp like the ones in the gnx
f8tlfiveo
My wife likes my spool and blow-off valve.
I agree, they are also made in the USA. Their is a plant that at least used to make them about 5 miles from my house. I think it was called maxima technology's
Similar threads
