Staggered Wheel Set Up

[mpeach1976]

I have a couple questions:
I'm looking to get new wheels for my '14 GT and I wanna go standard width in the front. What is the standard factory rim width?
Second question is: I wanna get a set of Bullitts for my car and I wanna go staggered...keeping the standard depth and width in the front and a deep dish 18x10 in the rear. Does anyone have a set up like this that they can post a pic of so I can see what it would look like?

 

[BlackBuggy]

It depends on what rims your car came with. Mine came with 19"s. Not as good for drag, but better for cornering/steering.

http://www.americanmuscle.com/chromebullitt-19in-0513-nittoinvo-stag.html
Scroll down to the bottom and look at the user-submitted pictures.

I- personally- like THESE.
http://www.americanmuscle.com/charcoallaguna-19in-0513-nittoinvo-stag.html

 

[JOSH'S BLOWN 5.0]

The factory rim width with 18's is typically 18x8. For the ones with brembo wheels, they are 19x9. Just a suggestion but I would go with a larger set up. Either 19's or 20's to fill that 4x4 wheel gap. I have 19x9 and 19x10 AMR's with frpp springs and there is still a decent sized wheel gap on mine

 

[mpeach1976]

The factory rim width with 18's is typically 18x8. For the ones with brembo wheels, they are 19x9. Just a suggestion but I would go with a larger set up. Either 19's or 20's to fill that 4x4 wheel gap. I have 19x9 and 19x10 AMR's with frpp springs and there is still a decent sized wheel gap on mine

I wanna stay with the 18" only because I like the look of more tire. I do agree with you though, that wheel gap does need to go...nothing lowering springs can't handle.