I'm gonna bet that unless you've got cams, full bolt ons, heads, power adder etc....you'll notice almost no difference in power when comparing the stock PI intake, to any of the aftermarket offerings.
Opinions On Intake Manifolds
- Thread starter Mineral4.6
- Start date
-
Sponsors (?)
trombonedemon
Well-Known Member
I got the Performance Products intake here's what I noticed; loss of torque, but increase in horsepower, the intake gets hotter, but meh. That intake COULD cause some idle issues, but I got Bama to tune for it, made a world of difference after. It actually made a more horse power at the top end, seems as if it smoothed out the horsepower curve, but diminished and or shortened the torque curve.
I didn't really buy it for the gains but more for never wanting to replace the damned thing again and or for the life of the car.
I did look at the Track Heat by Trick Flow, 700 bucks sheesh. Required some modifications egr, and alternator displacement. Only if I was in the market for a centri-blower. Thank your lucky stars you didn't buy that Dorman garbage intake. I still want to kick some ass for what the intake put me through.
I didn't really buy it for the gains but more for never wanting to replace the damned thing again and or for the life of the car.
I did look at the Track Heat by Trick Flow, 700 bucks sheesh. Required some modifications egr, and alternator displacement. Only if I was in the market for a centri-blower. Thank your lucky stars you didn't buy that Dorman garbage intake. I still want to kick some ass for what the intake put me through.
Similar threads
