Mass Air ?

  • Sponsors (?)


Do you have an aftermarket MAF and does it match the injector size?

How did you do the MAF conversion?

What are your engine mods?
 
its a ford motorsport conversion with a 24 lbs injectors and a C&L mass air for 24lb injectors. I had a pro-m on it . sold it cause I sold the Paxton off the car. mods are stock block. 030 over dart II heads , crane 544/544 292/292 cam. GT/40 upper and lower 70mm ,long tube headers. 410 gears
 
Did this problem just start recently when you converted to Mass Air?
You may have a parts mismatch somewhere...

Did the Mass Air conversion kit come with the 24 lb. injectors as a package?

Check the computer tag located on the end of the computer opposite the wiring connector. Typical numbers to look for are: A9L, A9P, X3Z, A3M and C3W.
 
No. this combo has been together for 15 or so years . (the car being MAF) . I had a pro-m 77 . with a Paxton supercharger I sold the Paxton, the buyer wanted my MAF cause it was complete. He gave me this MAF on the side it says AUTO SPECIALITES ? never heard of them and don't know if its a 24lbs MAF. how can tell?
 
No. this combo has been together for 15 or so years . (the car being MAF) . I had a pro-m 77 . with a Paxton supercharger I sold the Paxton, the buyer wanted my MAF cause it was complete. He gave me this MAF on the side it says AUTO SPECIALITES ? never heard of them and don't know if its a 24lbs MAF. how can tell?
Google is your friend... ask it almost anything you want to know...

See Google and you will find automotive specialties & MAF
 
its a ford motorsport conversion with a 24 lbs injectors and a C&L mass air for 24lb injectors. I had a pro-m on it . sold it cause I sold the Paxton off the car. mods are stock block. 030 over dart II heads , crane 544/544 292/292 cam. GT/40 upper and lower 70mm ,long tube headers. 410 gears

Both halves of that sentence cannot be true at the same time. :O_o:
 
  • Like
Reactions: 1 user