Build Thread The Hoopty Chronicles - New House, New garage, New Car?

  • Sponsors (?)


Before my brother n law went coyote, he was putting together a sleeper out of left over parts.

Ported p heads with the bars ground off the front, 347 in a Mexican block, cut and ported stock H.O. intake and a shot of nitrous. He wanted to use a stockish cam too, but it all got abandoned for the coyote.

Joe
 
  • Like
Reactions: 1 user
Now we're talking! :)

There are some fun ways to help hide a system. Now anyone who really looks is going to notice but the avg guy won't. I've heard or seen some interesting things. One guy pressurized his roll cage. Another guy installed a fogger "under" a super Vic intake. You can tuck the solenoids,black wire loom the lines, cut out the bottom of a gym bag to cover the bottle,etc. With a iron head gt40 intake etc most would think maybe a 12 sec car and yet with a track dedicated setup you could run 10's on a stock bottom end. Not saying this is your goal. Just having fun here lol
 
  • Like
Reactions: 1 user
Now we're talking! :)

There are some fun ways to help hide a system. Now anyone who really looks is going to notice but the avg guy won't. I've heard or seen some interesting things. One guy pressurized his roll cage. Another guy installed a fogger "under" a super Vic intake. You can tuck the solenoids,black wire loom the lines, cut out the bottom of a gym bag to cover the bottle,etc. With a iron head gt40 intake etc most would think maybe a 12 sec car and yet with a track dedicated setup you could run 10's on a stock bottom end. Not saying this is your goal. Just having fun here lol


Pressurized roll cage? Lol, wow! That's definitely thinking out of the box. Back when i worked in the shop before going to the field I can't tell you how many foggers i drilled and tapped on the bottom side of intakes. I also took a cheater plate apart and hid it in a two inch carb spacer, hiding the lines with wire loom.
 
  • Like
Reactions: 1 user
Pressurized roll cage? Lol, wow! That's definitely thinking out of the box. Back when i worked in the shop before going to the field I can't tell you how many foggers i drilled and tapped on the bottom side of intakes. I also took a cheater plate apart and hid it in a two inch carb spacer, hiding the lines with wire loom.
hurricaneinterior_zpsd37b0691.jpg


Under the dash where the heater used to be. An old skinny 10lb bottle hanging sideways jussst fits. Ask me how I know.
 
  • Like
Reactions: 6 users
You rode it it.. Did you notice the ride or were you too busy focusing on that camaro that was in the way? Lol
Didn't notice, hahaha. But I just looked at the price, and they're more expensive then the stranges. I'd like to go strange so I can put them on full loose if I go to the track with the new combo and chase 11s :D
 
  • Like
Reactions: 1 users