I like my off the shelf cookie cutter cam. Goes good with my cheese graters.
Post pics of how your foxbody currently sits
- Thread starter Mustangfan
- Start date
-
Sponsors (?)
Don't have a pic but, installed a new set of 14" springs from Upr in the front apparently my front springs were too heavy for what I wanted to do with it. So out with the old 12" 250 and in with the new 14" 150
Also put a new fuel pump in as I have been chasing my starting problems with this car, it was losing pressure so I dropped the tank and found I had a 190lph pump in my car so I upped it to a 255lph. Also found my gas tank had about a gallon of water in the tank so I'm sure that's what my real problem was.
Also put a new fuel pump in as I have been chasing my starting problems with this car, it was losing pressure so I dropped the tank and found I had a 190lph pump in my car so I upped it to a 255lph. Also found my gas tank had about a gallon of water in the tank so I'm sure that's what my real problem was.
teal9550
Member
4 eye ftw! Braver than me. I couldn't/wouldn't drive one in the snow lol. Any other pics? Plans for car?
teal9550
Member
Just bought it a week ago, I'm preparing the car for plasti dip in the next couple of weeks & yes the car is a challenge in the snow
I platidipped a set of wheels, hated taking that stuff off then my bud had his car done a year ago and we spent a weekend taking that stuff off. It would tear in little pieces that made this a very tedious job. Never will I do it again..... food for thought
Plastidip works great if done right... that said it's a pita to do "right".
You have to buy the stuff by the gallon and spray it on with a lphv gun, we used a backpack sprayer used to paint houses.
I tried using spray cans on a panel of my car to get by before I painted it. Got similar results tiny little pieces, I pressure washed the rest of it off. Lol
You have to buy the stuff by the gallon and spray it on with a lphv gun, we used a backpack sprayer used to paint houses.
I tried using spray cans on a panel of my car to get by before I painted it. Got similar results tiny little pieces, I pressure washed the rest of it off. Lol
stangboy
Founding Member
Put my new rear tires on the car, 15x10 race star wheels with 275-50-15 Mickey et streets. Also have the same race stars in 17x4.5 no tires since they are on back order until 2/20/16.
God damn race cars .
Sent from my iPhone using my fingers while my auto correct makes me seem illiterate
yea im having a ton of fun trying to find a wire diagram for the rear brake lights so i know exactly what to keep but i aint foundLooks like a lot of fun. NOT!!
! the dash lights and head lights i got thoughcoyote killer LOL
this is what happens when
gets serious...
mikestang63
SN Certified Technician
