i replaced the battery apron some time ago .i tried to fit the pass. side fender . look the fender apron holes are already punched ,yeah right ,punched in the wrong spot come on people if you are going to take the time to make dies to stamp something like this out ,take the time to do it right. i suppose it is partially my fault ,i should have checked it before i welded it in . this fender is the ford tooling, see the stamp? the top where it meets the door has a 3/8 inch gap .the face up to the door is not real bad but ,the gap at the top and bottom is close to where it is supposed to be and the middle touches the door .don't they use any kind of pattern when the make this stuff?? the bracket under the fender where it bolts to the rocker is 3/4 of an inch from the rocker ,going to have to completely re work the area. i here people complain about fiberglass fitting bad ,at least you can easily add to or take away from it .metal is not so easy .THIS IS NOT GOING TO BE FUN.