Separate names with a comma.
Another addition also is if you hold the throttle completly wide open and crank it over. It will cut off ignition and fuel.
Nice heads mike! Oh and nice to meet you at the picnic saturday!! Car looked good!
I am looking for a set of mint condition 98 gt wheels. Machined face with the black inlays..Let me know what you have or know of..
House of Wheels...
There a tamper proof torx bit also.
Sounds like a dirty maf sensor to me or a loose connection on the maf sensor harness. I would check that first
eectuning.org will answer alot of questions
How about fix the tps? Kind of hard to diagnose a problem with a already known issue. With the tps unplugged the computer will not add fuel as...
You dont have a tune on the quarter horse in every slot if the fuel pump wont stop priming. Make sure to select mode 4 that has 8 selectable banks...
If you have a flat tappet F cam, you can be a millionare. The 95 motor is only a roller and so is a F cam.
If you dont want to spend a bunch of money on caster camber plates, steeda has some camber bolts that the alignment shop can use to get it much...
It sounds alot like the distributor is 180 out... BUT if you can hook constant hot power to it and it run fine, then there is another problem. Call...
All the trim and moldings are supposed to be smooth.
Get someone to push in the clutch while you try to put the trans in the rest of the way. Should slide right in. Oh and ALWAYS grease the input shaft...
Its really close.
I vote vacuum leak all the way!
I just went through this whole thread, VERY nice!!!!! I live in the bham area also. Can wait to see this thing out at the local cruise in's!
I would put on it that you having the timing incorrect! Dont forget to pull the pill out to set your base timing.
So when comparing a 94 cougar 4.6 to a 98 mustang 4.6 gt? Would I be able to still do a pi swap on the cougar for a nice sleeper?
What all is different about the 4.6 compared to the mustang non pi motors? Where is the 20hp difference?