Separate names with a comma.
sorry no trades, just sale. but price is somewhat flexible
Selling a 1988 LX hatch
White w/grey interrior
power locks and power windows
8.8 rear limited slip and 3.73 gears
the stock mustang accessory brackets ALL work, the only one you need to get is the stamped steel one for the ac.
i'm going to try to make time to test the pump housing tomorrow
will post results as soon as i get them
thanks, but i did all that already.
i guess i should rephrase my actual question...
is it likely, or has anyone seen a bad connection in the...
i just recently finished my 4cyl conversion.
drove the car from my shop to the alignment shop(about 1.2 miles) and left it over night.When i went...
you tell me how one of those (in the correct thread- 5/8-11) is ANY different than the "correct plugs". if you hold them side by side,...
why not just go to the hardware store and get them for $0.30 each
is there a way to test it?
well. I never saw it in a vehicle but i got it from a local guy that only deals with mustangs and LSC parts.
I asssume he wouldnt sell a bad...
i just got done converting a 88 lx to a v8... i fireded it up for the first time tonight, only for a minute.
everything seems good, except my...
FIRST OFF........ETHER IS VERY VOLATILE......DONT USE IT!!!!
use a carb cleaner or brake clean, as they wont explode in your face if something...
i ran one years ago on my last car but i couldnt remember how it was
let me re-phrase...to keep it lined up(the path of the cable to the firewall), its seems as though it could be able to slide to the left...or does...
my upr quadrant didnt come with any spacers.
anyone know how much it needs to be spaced out to line up properly?
i got it
i tried the hammer and screw driver method....that didnt work.....so i got a bigger hammer!
well i tried again, my column definatly is not a collaspable one, (maybe only certain years are?)
are v8 steering shafts any longer?(mines a 4 cyl...
i pulled pretty hard and it wouldnt come out any...i'll try it again
i picked up a used D&D motorsports tubular Kmember and bolted it up tonight.
but my steering shaft wasnt long enough...i had to unbolt it right...