Separate names with a comma.
where was the leak?
Your welcome? What was your purpose for posting again?
where are you located? If you were local, I would tell you a guy in Jupiter Fl that has them. You may want to try NPD or American Metal Direct.
I'm keeping tabs on all of this so you guys can send me my vig check.. lol
10% off on LOTS of go fast parts.
I see TFS is one of them.......
Are you planning on upgrading injectors? I see you have 24#'ers in your sig. Those won't support 400hp.
buy whatever old style non DEX coolant is on sale- 50/50 mix. NO water wetter or other crap. You will need to make sure all the air is out of the...
look at the bottom of the dyno charts- before and after... as Noobz said it's actually a 30hp avg gain.
Ask the mechanic if he has checked the flywheel for runout and what is the gap between the clutch and flywheel. Also Sometime the clutch fork or the...
wrap your fingers around the rotor and pull straight up. Sometimes they are stuck on but it should come off.
Nice!!! 20 rwhp and the motor hasn't even been broken in yet. Plus I get that dropped a good 10-20 lbs off the car. Let's see some track times!
better yet, just go to a junkyard and get 94-95 spindles, struts, springs, brakes, MC, and brake hoses.
first thing I would do is crawl under it and see what is left of the floorboards, frame, etc., before you start tearing into it. Also. will the motor...
If you have nicks, take some marking dye or even a marker on one side of the EGR and TB and assemble. See where they do not leave marks on the...
Got bored and installed redline hood lifters I got on Ebay for $50. Yay or Nay?
Got bored and installed redline hood lifters I got on Ebay...
Make sure the mating surfaces are clean, dry,smooth and straight. Gaskets go on dry...
They should be able to press those out easily and reinstall them on the right side. Make sure they grease them up again and you are good to go.