Separate names with a comma.
pan needs baffles mashed. 5.4 crank hits them.
of course its one stpe at a time. roll cage, rear end, etc.
there is a leaf in there i didnt see. lol
the radiator has plenty of space. it isnt...
i cant believe i havent done this before now.
list of things left is getting smaller all the time.
mount driver's side...
great runs man.
my 4.6 revvs to 7k. always has. before the turbo it liked 6200.
those tires are rock hard.
i highly recommend hankook V12 EVO tires. they are fantastic. nearly as good as pirelli P-zeros my car came with.
ok. i get them from summit. the flanges are lasercut from ebay.
im an electrical tech at a powerplant.
they are just tacked. have to start somewhere. two more tubes on this side.
where the tubes from 7 and 8 join, the tubing steps from...
its the one in my avatar. Since that pic, i cut off the long runners, made 8 new runners in their place, and welded them in. i just never finished...
the cobra iron block IS a the block you have. mustang gt and cobra use the same block. iron 2 bolt mains with cross bolts.
get a used teksid or 05+3v and forge it. use the 3v heads and build it from there.
who is jealous of your "13.4 second??" car. really? 13.4??
14's is not "sick fast". no matter what gear it is. i highly doubt it hooks at all....
nope stock 97 markviii. im going to finish the one i started. its similar to the mmr part.
i have the flange made. its a combo of t4/t6. t6 length t4 width.
yep. im keeping the exhaust split to the housing, it should spool fine with a...
of course its coming back off after finishing the hotside for painting
for absolute hooking ....hoosier 275/50/15's. they have handled all the power ive thrown at them. ill see if they can hook the new motor, but i...
there is no wiring for the 4v. i even use the stock throttle cable. same sensors in the same place. maybe a few extensions needed but thats it. a...
so far the best tire ive used outside of P1 pirelli's is hankook v12 EVO's. they handle nearly as good as the pirellis
heres the motor built.
i admit i was tempted to take the easy way out and just put the little turbo back on it for...