Separate names with a comma.
I was really trying to lower the rpm range of the cam to make it more streetable
The cam has 5 degrees advanced built into it and I added an additional 4 degrees advance from the timing set. 9 degrees total advanced from stock oem
Any and all help is much appreciated
Loop wire is good and in the proper pin locations. What do you think about the B cam being to far advanced. 5 degrees ground into it along with the...
I'm not sure the year o2 harness. The pins and colors match up. What do you mean loop?
Found vacuum leak at egr spacer. Fixed and is better but no perfect. Still surges and the o2 aren't switching. Stuck reading 0.02 at idle and switch...
So its runs fine at first then bogs after 20-30 min of driving then has to sit for 30min to run ok again?
What's making you think its the processor?
Check fuel pressure. Is it mass air?
You will have to change pushrods due to high ratio RR's.
I'm runing 1.72 with a b303 with stock pistons so if yours are fly cut then 100% positive you'll be good
How does the gap up top look? It looks like its to far towards the rear. Loosen hinges push forwards then retighten hinges.
What year is the block? Stock pistons?
I run cheapies on our 91gt road course car. Those struts handle as good as any other in my opinion. We race the car at Road Atlanta. Atlanta...
No it shouldn't
My car was and original 4cyl an did the sn95 swap and bought some struts from oriellys ($60 a piece) for a 90 mustang and they come with spacers for...
The new struts come with spacers to fill the gap between the strut and spindle.
Ok just get some orielly auto parts struts and shocks. Thunderbird turbo coupe front sway bar. Factory rear sway bar. Progressive rate springs ( up...
What are your in tensions with the car? Daily driver? Drag race? Track use? Cheap beater?