Separate names with a comma.
Thanks for the advice A5literman
can you post some pics?
thanks for the suggestion.... let me throw something else out there...
This 408 will be replacing my 347 in my 93 GT and will be EFI
Mostly Street driven with a trip to the stripe once or twice a summer. Some light boost possibly.
Thanks for the replies guys. I will look for a better match Correction on the heads...they are 200cc RHS iron heads.
ya sorry I guess i left a bunch out.
it is at .050 lift roller cam
9.5 :1 compression
RHS 180cc iron heads 1.60/2.02 vlaves
Need some advice on cam for a 408 windsor. Below is what I'm looking at.
Lobe Separation Angle: 114°
This was my first time running this car and on street tires. They did tell me about a roll cage and harness.
I was at the track for the first time since 2008 after my care was finished and had to let everyone know how I did, I thought it was was pretty good...
Still for sale?
After replacing the factory k member with a UPR one, how do I jack the fron of the car up. I used to use the kmember in front. how are the rest of...
I want the upr k member kit but think i might have coil over spring clearance issues. there is currently 1" clearance now, will the coil overs fit?...
Thoser are Halibrands...the american racing ones are close but not quite the same. Notice the triangler slots are differen sizes. One the AR ones...
Who makes these?????
These wheels...I like these. who makes them. They kinda look like old cobra wheels.
Looking to change the wheels on my 1993 gt convertable, they have been there 5 years. current Pictures at www.onefast50.com. It currently has 2001...
i used to use a black sharpie but the line was not very good....dont know why I did think of dry erase. I find one and try it tonight and post...
I use pipe dope because it shows the the curve of the roller...problem is the bare metal in the center is washed out in the picture. it measures...
yep i used a solid lifter...its hard to tell by the picture, but the actual contact pattern is super skinny.
I found the correct pushrod length but the length is 1/4 longer than stock. The heads are NOT 1/4 difference in thickness. I have measured the...
The heads were checked by a machine shop before install and all was in order. Anyone else?