Separate names with a comma.
did a 5 lug swap. Kept the drums, ranger axles. 98 Cobra wheels. As you can see, the wheel sits in.
well I have the option of 1"...
Should update this..whats going on it
Been a while, so I'll toss in an old picture of my 88
Car is currently on stands waiting a 5lug swap :)
I dont believe you want to splice into the black/orange wires when going to the kill switch. as that would still provide power to the starter when...
try a parts store.
Yes. the fins need the air to pass through them. if they lay flat the rad will not work properly.
You can buy rad combs that straighten the fins...
i replaced my 02 sensors a month or so ago. im getting a code 42 & 92 saying im rich. i hooked a volt meter to the 02s to monitor what theyre...
hmm, makes sense! Thanks!
Anyone ever have a Bap sensor go bad on them? What symptoms did you have that lead you to the bap?
And are the 2.3 bap sensors the same as the 5.0s?
thanks, ran the codes. got a 67, 81, 82 & 22 with koeo.
anyways i think its my optimizer. went back to 19lb injectors and stock maf and no poping.
not loosing coolent. umm, see the kicker is after the few minutes of crappy driving, it drives great! like its only a temporary thing.
Ok, just got my car on the road. had it out for a few drives, everything was great. So one day last week im on the highway, and i think i smell...
So i got my car running today. Swaped in my 24lb injectors. Pro-m recomends setting the idle voltage at .7-.9. Thing is at setting 1 its reading...
just install a clear fuel filter. you'll know right away if the oil is coming from the pcv.
looks like this...
in case you dont know what the spout is.heres a pic. you can unplug the small tip of that connector.
loosen the distributer bolt, remove the spout...
Yeah, find a good local shop and decide what ya wanna do. basic rebuild or all out stroker...and welcome to the mustang hobbie!!