Separate names with a comma.
I thought about doing something like that with a old mac cold air intake and procharger hat but haven't had time to make something that doesn't look...
cool thanks alot.
I hope to get one ordered next weekend.
I think I'm going to use the 157 tooth bellhousing I think I may actually have one in...
no1 has any idea? It's about time to order the tranny and I'm scared i'm going to order the wrong one if I guess.
If you have never done this u might had better get someone who has with u.
The springs can fly out and hurt you or even kill you. It's happened...
Ok on the dip stick issue
personaly I would just drill out the hole on the block to accept it.
I've not goten to that part yet.
I did however locate the flywheel you need lastnight.
Ebay sells a aluminum 28oz that should work for u.
You could however take the route I took with my build.
Sence all the issues seemed to fall on the balance weight I desided to go with a C4 tranny....
Dads can be like that sometimes.
My first car was a 87 gt. I wasn't allowed to do much of anything to it except drive and wash it.
I was 16 at...
I never have nor heard that eather. Am I missing something?
I can say I've never had a problem with vibration after a u joint change.
Firing order is defined by the cam.
Atleast I assume it is. I used a 302 cam in a 351 once by changing the firing order of 351 to the 302 firing...
yeah go ahead ur cool u might need to change paper sooner thats it.
pops off be very careful not to bend it though.
A wide putty knife works well or those multi tools they sell for removing trip and installing the...
Auto parts store should have it near paint.
I own a powder coating shop so this is up my alley.lol
I would use wetdry with all the paper.
Nutcase has a good point.
being yor total stock U could gain a fair amount just by bolt ons and exhaust.
Then when u do drop heads on it your...
u checked timing?
Mine did that when I first built it. Although it's a carb setup.
I put it on the dyno and played alittle and got it adjusted...
around 75hp give or take a few IMHO but maybe more
Maybe flywheel is untrue?
My LX had a vibration in it for awhile I tried 3 diff things.
New clutch setup
just a note on LT headers.
If your car is as low as my 89 lx u might have problems.
I bent the hell out of the drivers side LT I had on mine when...
I'd test my valve springs.
My ol ladys gt was droping off power when it shouldn't have been. At fist I thought I was sucking the fuel line dry. I...
Did u miss a gear or something?