Separate names with a comma.
Do AFR 225 mount up to standard headers without any adapter?
Where is the cheapest place to get the AFR 225 and do they require anything special for the headers to bolt up?
I think the S-trim may be too small but before I go for an upgrade, I'd bolt it on first to see if I can't achieve my 600rhwp/600rwtq goal. If not...
Glad you asked. Here's what I have and looking for.
Car is a street car and will run on pump gas.
5 SPD with EFI
Looking for dyno numbers for guys running a 331 or 408 from out of box (untouched) Victor Jr. heads.
I definitely DO NOT want my wheels moved in anyway so I guess the QA1/HAL is out because I read somewhere else that the wheels get moved.
I did. Maximum requires coil over. I want to use stock A-arms and spring set up
1. Car is primarily street driven so it needs to be strong enough to endure that. I don't need a k-member designed specifically for drag racing....
My sincere apologies go to the entire crew at Larocca's Performance.
Larocca's and I are going to try and resolve my issue in a professional...
I hear what you are saying. When I had 24's n/a I experienced the same issue I am having now with blower and 42's. Obviously maf's have been changed...
I will look into a couple of things. Every little bit of info helps and I appreciate it. I need all the help I can get. This really sucks ya know?
what do you use to open up the file? They are a .BIN
File downloads as a .BIN
What do I use to open file up????
Could somene post the timing table for C3W?
How much timing does the EEC-IV add? I know I have seen this posted before but couldn't find the info when I searched.
Here is some additional info that I gathered. A/F is supposedly good at idle 14.7:1 or very close to it But I did not actually verify this with my...
OK...Had my car tuned at another shop. They tuned the car with O2 sensors. Results are still the same as far as catalytic converters go. They are...
I was under the impression he was speaking of the type of MAF used when setting up a Vortech the way it was intended.
You still use a draw thru MAF