Separate names with a comma.
do you know why it fell out
was it the plug behind the distributer, that sets back
Has anyone ever seen the press fit oil gallerie plugs blow out?
Is their a bad reason to run a high volume oil pump on a street driven 5.0 with HCI and supercharger?
take the trani out with the bell housing still bolted to the trani , then you might have to drill the bolt out from inside the bell
What should I use for The cork end pices for the lower intake gasket
Last time I used the cork ends coated with silcone, and it leaked,, [after a...
per Federal Mogul,-- 6 thousands per every inch of bore, so for a 5.0 24-26 thousands
What range of rod and main bearing clearance do I want, on a HCI 5.0 with 10psi of Vortech
stock short block
I dont want you to feel bad ,but, We drove my wifes 89gt aod mustang to the Woodward dream cruise.
The car has edl heads ,stock cam with 1.7,s...
I dont remember why, I did it maybe 7 years ago.
it was that pink [Stallion ? ] converter,
Do you think my car will be ok?
I have an 89 mustang HCI , 2800 [pci] converter [non lock up] AOD car with 410 gears.
No trani cooler, but I did...
yes,,, Vortech said my kit would give me 8psi, My car has power pipe and I have 10 psi,...
yes on a naturaly asp motor the stock air box is fine, and I dont know if I want to sell my original one
the car has a Vortech on it with a power pipe
When you remove the stock air box on a fox body, it leaves a oval hole in the iner fender, does anyone make something to pluge the hole?
does it have to be a pro-m?
I have an 89 gt aod with edl heads ,cobra intake,b 410 gears , stock cam with 1.7s and stock mass air and 19 injs
That would be awesome
What would the shipping costs be to ship to Ohio 44903 zip? Thank you!