Separate names with a comma.
Yes it is a three speed. The two speed would have a u shaped wiring plug.
Look up CSRP. Talk,with Dennis he is very helpful and reasonably priced.
Yes they are very helpful. Dan is easy to talk to and he uses the parts that they sell.
Look at the post six posts down. He used hos Flofit/scat sliders. " I found the ultimate junk yard seats."
The vacuum reservoir is less than 40 dollars at Summit part number G1464.
I added a vacuum reservoir tank on my 302. It's a black can with one hose from the manifold to the can and the other to the booster. It works well. I...
Check out CSRP brake systems and give Dennis a call. He will be able to help you.
Check out Opentracker or Street and Track for suspension pieces. They can help. Very nice folks to deal with.
It looks like an electronic ignition. Ford Durospark?
Candphall and Jim,thanks for the advice. The crescent wrench did the trick. Real easy took a couple of minutes!
I am installing torque boxes on my 65 fastback. The bottom of the rocker where the lower lip of the torque box fastens is bent outward. Does any one...
Is the plate on a hinge? Or a slider?
Yes the car sagged. I put a level on the front frame rail and it was off. The door sill was level. I cut the toe boards loose and the floor supports,...
Jim thanks for the reply. I have been watching your projects here for a while. I am amazed at your ability to put your cars back together. I was...
I replaced the floor supports and partial toe boards in preparation for full floor pan replacement. I clamped the floor supports to the frame rails...