Separate names with a comma.
I'm stationed overseas in Germany.(so it's hard to get blocks over here)
I have the opportunity to get a Teksid short block out of...
I'm attending college in Stuttgart,Germany.
My 01 GT is registered with the US Army Europe system. (I work on base)
I just got my oil filter sandwich adapter which has extra ports for oil feeds etc.
It says that the ports are 1/8 NPT.
There are plugs...
My rack and pinion is shot....power steering fluid shoots out everywhere.
What's the best place (not too expensive) for a new (or reman) rack...
My 01 is supercharged via Vortech SQ.
Last week I noticed that the t-fitting that comes from the oil filter and connects to the oil...
I took off my oil pan to check rod bearings and I disconnected a sensor right under the oil filter.(connected to a pipe that's also...
I recently ordered a set of rod bearings for my 01 GT.
I received the bearings a couple of days ago and the package says Ford 4.6l...
While I was dropping my kmember I noticed my tie rods are in pretty bad shape.
I knew I was losing steering fluid somewhere.I kept having to...
I've been hearing a ticking/knocking sound coming from the bottom end of my engine.
Just today I finished removing the kmember...
I have an 01 GT.
I know that Ford put the T3650 sometime during the 2001 instead of the T45.
I had the transmission out and was...
I'm stationed overseas in Germany and now have a spun bearing in my 01 gt.
Getting an engine over here is hard.
But now I found a...
My engine most likely has a spun bearing so I will have to replace it or get a new engine.
I've only torn apart a Chevy 350...never...
My engine's f'd up...probably a spun bearing.
Which companies offer shortblocks with the best prices?
I'm not looking to get...
Turns out either my rod or crank bearings could be toast.
I get this very loud ticking sound coming from my block/tranny.
I'm currently stationed in Germany with the military.
I'll be visiting my sister in Louisiana this summer and I...
A couple months ago I had this nice write-up. A step by step how-to remove and install a tranny.
My 3650 is most likely shot and I...
Recently the check engine light came on and I checked the codes.
It gave me a P0460 and P0351 error code.
I've read that P0460...
I've been posting a lot lately about this weird rattling or ticking sound that my 01 gt is making.
It sounds like it's coming...
I finally figured out the ticking my car is making is clearly coming from the tranny.
The throwout bearing was really worn.
The ticking sound I thought was coming from the lifters is definitely louder under the car.
It sounds like it's coming from...