Separate names with a comma.
Hey there - all is well. Began building a race track in December 2009, we are nearing opening, life has been very busy!
NOLA Motorsports Park -...
Adam, send me an email, got something for you - [email protected]
Post up a log and we'll take a look. Car should run pretty ok with the 24s, 24lb meter (for a GT) and a tune.
Sure there are no exhaust or...
I'm considering black with argent stripes or keeping it blue but changing to the new Mach 1 azure blue with black stripes. Leaning towards the new...
Great build, we have similar plans with the fuel injection and turbos.
My first step was to put together a EFI system from a foxbody and tune...
I like a good aluminum head with a thick deck for higher power levels to keep things in place. ARP bolts or head studs with a 9333-pt1 gasket.
I'm there with s-trim at about 17psi through a 4R70W and trickflow heads, stock cam and cobra intake (ported lower). Running methanol injection....
Your chip will plug directly into any of the PCMs listed above and work properly.
Yes, an auto PCM (U4P0, W4H0) can be reflashed as any other in the same family (J4J1, T4M0). Cannot flash a stick car to run an auto transmission...
The dyno operator should be able to look at wheel speed vs engine speed to find any driveline/tire slip.
My car is right at 500rw through the auto and runs low 11s. I had tmoss port my lower. Supercharger with stock cam. Nice intake for a stock piece....
I believe it's a non-replaceable part of the PCM circuitboard.
And what color blue is that?
No, I haven't run across that one yet!
I'm spoiled by the flexibility that a QuarterHorse/twEECer gives over the PMS.
Some will be happy with the ease of use the PMS gives, some will...
Look at what makes a backfire - if you believe your timing to be correct then you have unburned fuel in the exhaust.
Because this happens at...
I run the D-spec, great shock/strut for how my car is driven, autocross, drag strip or daily driver depending on the day of the week.
Not for me. :)
Most people aren't putting a completely stock motor in anyways so swapping the firing order around is one of many items changed...
I just changed the firing order in the tune. This allows the O2 sensors to work properly.