Separate names with a comma.
Yes the stator wire is normally the whire wire with the black stripe.
I would recommend using the same gauge wire and solder and shrink wrap the...
looks nice, let me know what price you are thinking
Your belt. Check the tension, the pulleys and the tensioner.
Your answers are contained here
Finally learned how to read codes | Mustang Forums at StangNet
That is a fire waiting to happen.
If you want to run a 3G alternator properly, this is what you need to do
1. Only use the stator wire from...
Good catch. That switch is prone to melting. Check the wiring leading to the switch while you have everything open as the wiring also tends to melt.
pull the wire off the S terminal and see if the car stops cranking. if it continues you have a problem with the switch.
4cyl to v8 swaps are notorious for being hack jobs using mismatched harnesses and sensors.
Be prepared to have a lot of tech thrown...
The trouble going into 1st and 3rd could be synchros and/or the shiftter as those are the gears that get banged the most when guys are tying to...
looks like a nice, clean car at a decent price. .What are your goals? Daily driver, street/strip car, weekend toy? Know that the early 86 motors...
Anything is possible- however they are different frames. It may end up being more work than expected with sub stellar results. TMI sells later...
I had a C&L meter once- made a great paperweight.
LOL cold claw- that is when i stuck the carb in the freezer--- it was a gold claw/demon carb
On my 85 I made 442 rwhp on a n/a 347 motor and ran 10.26 @ 127
Specs were as follows:
11.5 to 1 J&E pistons ,
Eagle crank, .
675 solid roller...
I think we are looking at another " want to blow 4 years and $40,000" thread coming, Paging @RacEoHolic330
I would work with Mark at CHP since they are building your shortblock. 1000 hp is going to turn that unibody into a pretzel without the...
That carpet-1974 called- they want that carpet back. lol
best advice I can give with wiring is
patience patience patience
replace any worn or damaged wiring.
solder all connections and cover with...
Like I said in my earlier post- the motor didn't decide to backfire at 50mph and shut down for no reason and I know where this is going.