Separate names with a comma.
Make sure you check that it was not stolen.
Something sounds fishy.
IMO, No title = NO SALE
Good luck with it!!
If there is a metal id tag on it -- what are the numbers on it??
Should be 1352 - xxx
Here's a good pic of the underside of the upper intake.
Maybe someone can mark up it as to where the lines go. I do not know how to do that....
Sorry guys but I have not had any time to work on the Stang. Too much other stuff going on but yesterday I was able to replace the...
What exactly do you mean by "the tranny is jacked"?
Sounds to me like the throwout bearing seized and wiped the clutch. You should be good with...
You want the silver based stuff. That is why it is pricey. It was like $8.00 for a very small tube.
Silver thermal transfer compound...
Jasper is a high volume engine rebuilder. Sometimes the quality control is iffy.
I would check to see if the engine came with a warranty and...
I use heat sink grease. It is not inexpensive but it works great!!! You can get it at Radio Shack. Good auto parts store should have it also....
X2 on Thumper Thumper of Orange Park
Here is a good write-up, Courtesy of The Corral.
8.8 Axle Gear Install
How many factory speakers do you have in the car?? 4 0r 6??
If you have 6, it is the premium sound system and you will need the factory amp...
The "p" heads are not drilled for emissions, but since you have a '79 it wont make any difference.
I would reccomend getting a set of the Ford...
$750 - New top, liner, padding and glass. It was worth every penny.
The guy took a week to get it done, but it was perfect when he finished...
Has the ECU ever been reprogrammed for the 24 lb injectors??
Stock ECU's are programmed for 19lb injectors.
If you are running 24's on...
You can do that but you may have to trim the shifter opening in the floor pan as it will now sit 3/4" further back from the engine because of the...
^^^^^^^ I have a converted 95 t-5 in my 90. No problems.
All you need is the foxbody input shaft and foxbody bellhousing
How long has it been sitting????
Do you know if it even runs??
Without pix----- I'd say $500
-Take a peice of string and tie it around the pulleys the way the belt runs.
- Cut string and measure length
- Go to parts store and buy 3...
You can buy the alternator wiring harness, pre made with OEM style connectors, here:
RJM Injection Tech Alternator Accessories & Parts
It really depends on what you have done to it. I would budget $2500.
Are you having any troubles with the engine??
I would check the oil...