Separate names with a comma.
Then I do then, cause I've done that several times and it still cranks. The two yellow ignition wires melted and are touching. I tested by getting...
Thank you, I'm going to get my battery checked tomorrow. But I will jump the solenoid at the big posts with a screwdriver as a bypass, to see if...
Nice just 5 min ago I was thinking about that particular brand cause my solenoid stuck once out of five starts so I'll check in today.
Thanks for the suggestions, the old starter they attempted to bench test, and it started smoking, so yeah it was bad. I had them bench test the...
You can see in this video, starter is grounded internally. Reason why it's been drawing too many amps and sticking my solenoids.
Thanks I will do that too
Yes that wire, what is happening, looks like it's touching the body because of the tab mount
I can't see your picture, but wire from starter is grounded. It is not connected to the solenoid, or anything but the starter
Thanks all the above was addressed, I have ground wire from battery to solenoid.
I have found that the wire going to the starter is grounded in...
Ok something tells me that I should not have continuity between ground and the wire that is connected to starter, but I do. I can tell it's...
12.76 v at battery key off
12.76 v between starter and each big post of solenoid.
12.45 at battery key on
between starter and each big post of...
I have a multi meter and voltage was good key off and key on.
And it sticks with the starter and I have to pull the starter wire from the post.
When I shake the solenoids, the insides make noise
I replaced my starter with a reman, because previous has stopped engaging and blew my solenoid.
Since, I have blown maybe 4 starter solenoid. In...
Made a driving sound video and you can tell it's running nice now. If you have speakers that reproduce bass you'll get idea how deep the sound is....
Oh man hehe that's tomorrow!
Problem solved by rebuilding 3 burned spark wires (burned off the headers)
And changed fuel filter (clogged)
**And allowing the right amount of...
I'll do keo with jumper on clutch switch like I did running codes
I didn't do the conversion myself, previous owner did. How can I check?
I plan to close the egr tomorrow. It was open cause it causes me to stall...
9 cyl bal