Separate names with a comma.
The clip that holds the wire coulpler to my injector broke, how should I fix it?
or will it be ok like it is?
I have an 89 fox mustang, that Im puttting a motor back in.
I noticed that where the plastic fuel line is molded to the crome fuel rail, it got...
Has anyone ever seen the press fit oil gallerie plugs blow out?
Is their a bad reason to run a high volume oil pump on a street driven 5.0 with HCI and supercharger?
What should I use for The cork end pices for the lower intake gasket
Last time I used the cork ends coated with silcone, and it leaked,, [after...
What range of rod and main bearing clearance do I want, on a HCI 5.0 with 10psi of Vortech
stock short block
Do you think my car will be ok?
I have an 89 mustang HCI , 2800 [pci] converter [non lock up] AOD car with 410 gears.
No trani cooler, but I did...
When you remove the stock air box on a fox body, it leaves a oval hole in the iner fender, does anyone make something to pluge the hole?
I have an 89 GT with 2800 stallion converter, cobra intake, edl heads, stock cam with 1.7,s - 70mm throttle body, 410 gears, and a stock mass...
I have an 89 GT with edl heads and cobra intake and 410 gears.
My question is how much stall should my converter be rated at? 2400--2600--2800--3000
What is everyone,s thoughts on buying a car with a rebuilt tittle?
The car in question is a 2007 gt mustang
I have an 89 lx , and if it sits for 3 days or more the bat will go dead
But not if I unhook the bat first
one more thing I made shure all the...
are the new 6cyl,s interference motors?
When was the last year for push rods?
what year,s were push rod motor in the v-6 mustang?
does any of the late model mustangs have a timing chain problem with higher miles?
Does anyone on here now if the Gforce 5speed is a good trani? I have 450 rwhp and was thinking about one , thanks
My 95gt,s front crank seal goes bad every year or 2, I dont see anything wrong with the harmonic balancer.
anyone else have this problem or an...
I m leaning toward staying with standard shift but dont know what is the way to go
I forgot to mention that the trani already has a cobra gear...
Has anyone else had a problem recently with motocraft oil filterss leaking?