Separate names with a comma.
I'd go Trick Flow Street Heat intake with the XE270HR Comp Cams camshaft or a custom one if you want to go that route. Can't go wrong custom, though.
Virtually no performance difference at your power level but the 65 will have better throttle response.
19s will support roughly 300 horspower at 85% efficiency.
I'm only 17 so feel free to contradict me on anything I say and I'm open for...
What difference did you notice when you swapped it over to MAF
I can get the heads for around $1200. They made the most lowend of all the heads tested in the mm&ff sbf head comparison and this was with a...
I keep having a lot of trouble figuring out what kind of engine setup I want to run and every time it seems like I'm going to be able to do...
Ok have a question or two.
How far of a stretch would this be?
Could I make 255whp with a fresh factory bottom end, stock E7 heads, a TMoss...
Figured anyone with stock heads and cam would know. :shrug:
Ok, I know I need a tach, but right now I would like for question to be answered. I only need to know 1st through 4th. 1st gear is a 2.95
I'd go ahead and rebuild it. I got a full rebuild kit from FelPro through Summit for $292.xx change. Came with Speed Pro rings/bearings and a full...
I know I need a tach, but I'm 17 and i'm in a very tight money quench as of about a month ago. A $2500 one
It reads double. My friend kevins car did that when he swapped his from a 2.3 to a 5.0
Ok, i've been running w/out a tachometer for a while and was wondering at what speed everone's at at 5000rpm with 3.73 gears with stock sized tires.
Anybody used one?
A 5000rpm redline probably. Technically I do believe they'll fit, but the heads will have to be drilled for the larger bolt holes of a 351. You're...
I've got a UPR triple hook that I'll be putting in as soon as I can remove the damn little piece of the quadrant from my clutch pedal called a...
Can anyone show me pictures of their fwa installed?
There was a rubber piece in the firewall that's gone and a plastic piece that's still on there that meets the FWA.