Separate names with a comma.
I pulled the trani off the car ,and flywheel, droped the back off the pan.
Then resealed that corner, and it still makes a drop off the corner oil...
How do I know if a car has been in Florida its whole life?
Someone could have moved down to Florida and brought the car with them
Can someone tell me what this noise might be?
this is a fresh rebuild
I think something is hitting the baffle
Someone tell me how a custom cam guy can know something, that a cam manufacture does not,
maybe if its an odd cubic inch motor
or maybe a custom...
Just how hard is it to rebuild a t-5
Should I go to the ford swap meet and buy a 6 speed change over? or put the A-5 kit in the one I have?
if I go 6 speed what do I need to know,...
Where is a cheap place to buy just a disc 10.5 x 26 spline
Does it realy matter what antifreeze we use in our fox bodys , yellow or green
What is that canister for in the pass side front by the radiator ? and can you just plug it off?
It has2 vaccume hoses going to it
The clip that holds the wire coulpler to my injector broke, how should I fix it?
or will it be ok like it is?
I have an 89 fox mustang, that Im puttting a motor back in.
I noticed that where the plastic fuel line is molded to the crome fuel rail, it got...
Has anyone ever seen the press fit oil gallerie plugs blow out?
Is their a bad reason to run a high volume oil pump on a street driven 5.0 with HCI and supercharger?
What should I use for The cork end pices for the lower intake gasket
Last time I used the cork ends coated with silcone, and it leaked,, [after...
What range of rod and main bearing clearance do I want, on a HCI 5.0 with 10psi of Vortech
stock short block
Do you think my car will be ok?
I have an 89 mustang HCI , 2800 [pci] converter [non lock up] AOD car with 410 gears.
No trani cooler, but I did...
When you remove the stock air box on a fox body, it leaves a oval hole in the iner fender, does anyone make something to pluge the hole?
I have an 89 GT with 2800 stallion converter, cobra intake, edl heads, stock cam with 1.7,s - 70mm throttle body, 410 gears, and a stock mass...
I have an 89 GT with edl heads and cobra intake and 410 gears.
My question is how much stall should my converter be rated at? 2400--2600--2800--3000
What is everyone,s thoughts on buying a car with a rebuilt tittle?
The car in question is a 2007 gt mustang