Separate names with a comma.
What programer would be best for my car?
Thanks Guys for all of your help.
How much can you advanced the time with out problems?
Some boby told me you could advance the timing at the cam and make a lot more power dose anyboby here Know anything about this?
I am wanting to put this motor in my 1990 F-150 Please help if you can
with the 1990 F-150 upper intake work on a 95 5.0 h.o lower intake
I've got all of these parts already all but the Twin Turbos. And yes the car is a 8 point roll Cages in it 9 in ford rear end 4 link Suspension. I...
I am running that cam with stock springs and it dose great in my mustang the cam that i am running is about the same as ths f-303 but 1/2 the price.
It could be from the carb but it could be the timing also
If there is any one in nc looking for a set of GT40p Heads and Gt-40 Corba Intake TB And Ford Racing 1.6 Roller rockers and A Trick Flow Stage 3...
I would check my rocker arms! My is running Great know! It was doing the same thing your is to.
I got a set of GT40p Heads a Gt-40 Corba Intake TB And Ford Racing 1.6 Roller rockers and A Trick Flow Stage 3 cam for sale if you are looking for...
It dose not mater which trans you use just as long as you know that if you use a auto trans you will have to have a stall. Fit for what every cam...
The Gt-40p heads is about the best stock heads ford makes
The ford Explorer ECM is Programed for low end power unlike the Mustang ECM.
Read the TOS. No sales in the general discussion forums.
The Summit Racing 512 lift is a good sounding cam it would have be a 5 speed inless you use a stall.
Are you sure you rocker arms has not backed off? I had my do a lot like your and my rocker arms was loses.
can i run a flat tappet cam In my 86 mustang 5.0. Without putting mass air flow on it?