Separate names with a comma.
Try a 180* thermostat. If the guage is in the normal range, it may not be hot enough to open the 195* one. Also, correct rotation pump?
Altitude? Air temp? What RPM are you shifting at? If it has a stock converter, you're not going to get the launch RPM much higher.
You might look at this
Mustang Parts : 2005-2008 MUSTANG 3d500 WING :: Mustang Rear Wings :: Mustang Body Styling :: 2005-2010 Mustang ::...
I've been looking at this one for the rear
Right Stuff Detailing ZDCRD01 - Right Stuff Detailing Standard Rear Disc Brake Conversion Kits -...
But no paxton... :D
Try pulling the secondary link off and running it. At least it will tell you if the problem is on the primary or secondary...
FWIW, I ran across these drop base setups.
Auto Parts Toronto
Might look into a tall boss 429 scoop. The distributor will be a problem because it's where a cowl hood slopes down.
azmustangs is more of a 4x4 meets politics board now... :rolleyes:
BTW, ran across this
Category & forums listing -...
What intake? Have you tried a drop base setup? Might ask over at 460ford.com , there are a few people running similar setups.
This is a good place to find out whats going on
Cruisin' Arizona Sponsors
Check the studs too, to make sure they aren't comming loose.
Yeah, I know of a certain promod that ran into the 6's with a stock block with the conversion. I have the engine systems main caps, They're BEEFY!...
Less options in what way? It all depends on your goals too. A 700HP BB is going to be cheaper than a 700HP SB. If you're looking for450HP, then...
Make sure you look at the tech side of running 9's, ALOT more safety equipment needed than for a 10 sec car. Things like a parachute, window net,...
Because for the same $$ it takes to build a 466 SBF, you'd have a 557" BB..
Weight isn't that big of a deal, 260LBS more.. less with aluminum...
Wrong forum :D And did you replace the flasher?
You can get afjustable guide plates. Or cut the ones you have in half, line them up and welf them back together.
ProComp Guide Plate Fix... -...
Looks good. Carbs are easy to work on.
But you're willing to chop it up? :shrug:
Sell it and buy an aero.