Separate names with a comma.
Welcome to the forum!
OK, if only one wire to it and it is about an inch square and about 1/4" to 3/8" thick I am guessing you are talking about a Radio Ignition...
A pic would certainly help!
If you mean these, they are the Camshaft Position Sensors.
I recommend a Wide Band Air/Fuel Ratio gauge.
Did you follow FORD instructions and bleed all four wheel cylinders starting from the one furthest away to the master cylinder to the closest in...
Agree with Earl on what you need. You may also want to consider a Performance Automatic Deep Sump Pan and a transmission temperature gauge. In...
Mickey Thompson 325/50/15's ET Street Radials on mine with Race Star 15 x 10, 7.25" back spacing rims.
Removed the OEM frame rail...
They are Mickey Thompson ET Street Radials, 325/50/15's.
I removed the bump stop to the side of the frame and re-positioned the bump stop on the...
Can't speak to the front as I have 14" brakes, so I used 17" rims. On the rear you need to trim the sway bar mount as pictured here, then it is no...
Steve, nothing complicated about the install as it is just like changing springs. I often find it seems like it takes longer to get my car up on...
I went with Maximum Motorsports Caster Camber plates. No issues at all with the alignment.
Too bad you didn't know sooner that your name was misspelled, maybe you could have refused to pay because it "Is not me". LOL
Glad the install went well, enjoy your new 4:10's!
Good luck with the installs!
Recommend you take a look at PA Performance.
How about posting some pictures of your painted differential?
Another +1 for 5W-20 Royal Purple.
Here is mine:
+1 for the American Racing Headers. I picked up 17 RWHP with ARH Long Tubes, catted X-Pipe and Magnaflow cat back exhaust with Magnapack mufflers.