Separate names with a comma.
I have a 90LX hatch...but mine is a 5spd.
The best mpg I ever got was 30.
It averages 27-30 depending on how I drive.
I installed a ranger...
They'll fit...mine has 245/50r17 on ROH Snyper rims with stock springs.
The only rubbing I had was lock to lock,and that was barely..
For what you are looking for...check this out.
Kirker - Automotive Finishes
You also may want to check the inertia switch in the back panel(next to the
left tail light)and see if that didn't trip.
Just a thought
I'll cut you a good deal...I'll send you pics,then you can decide.
I have a set I pulled out of an 86 tc if interested...
Pm me and I'll get some pics for you...see what you
think and shoot an offer.
Here's one I belong to..out of Saline,Mi.
check it out... http://www.salinestangs.com/
You are right....Spearco had one in the 80's,I looked at buying
one when I was fixing up a '78 Pinto.I even did a search for them some
I just plugged it.I believe there is only one,for the
flapper door....My lx is a 90,so your set up will be
Make your own CAI,there is a "how to" at the top of the forum,I
added a ranger roller cam, a ranger header and a 2-1/2 inch catback
Not sure...I picked it up trading parts.
I have one on mine also...the only thing I had to do
was replace the oil fill cap with one of those rubber
push on plugs with the chrome cap...I...
or check out the website... http://www.salinestangs.com/
I have a 90 stang,the turn signal flasher on mine is on the right side of
the upper part of the console behind the radio,you may have
My 90 lx
HOWNDOG,if this helps any..I ran 235/60r15 on the front and 245/60r15
on the rear with 10 holes.The only problem I had with rubbing was turning...
I'am going on 3 years with my cheap walmart kit with no problems.
You know....you may be on to something there. ;)