Separate names with a comma.
185's should be fine. You can always port them if you decide to go bigger or you can opt for the 205 if your gonna go to a 408 or bigger setup in...
I have a 650HP SERIES prepped by quickfuel on my small block...You need not go any bigger than that.
Just get yourself a 8.8 rearend from 87-93 mustang and if you wann up grade your brakes get some from a 87-93 V8 foxbody.
HPM Motorsports has them but you won't be legal at the dragstrip and You can't use lap belts on a streetcar for street driving.
Wow!!! I never had a problem with my AFR 165 heads..But again mine came from [email protected]
1262 don't have the heat cross over holes..Like the 1250's do.
You could have purchased a new trans for that much.
It's nice to see another 4 eyed car...You don't see many of them anymore.I have on as well that was a "stock 85" when i bought in 94 for 500.00...
Get the Dist from MSD # 8582 and make sure you change that dist gear that comes with that MSD dist... i think and the 600 DP should be ok.
Take your stock tank and have it sumped...That holley blue is for pushing fuel through not pulling.
So your class is 13 seconds and slower....That's a good beginners class.
It has to be in Vinyl if your running in the NHRA bracket program (Your in Div #3) what class are you running in? if you place in the top 3 in...
If your gonna spend the money to get a "Custom Grind Cam" then you should degree it and follow the spec's to every number....If your off a degree...
And if you port those AFR 165'S...Man, hold on to your hat!!!
Go to pep boys and get a brass 3 core radiatoe since your gonna replace the stcok one anyway.make sure you get a 15-18lbs cap with the pressure...
Yea..Your right about that,but the T/W you can only use a certian cam size cam and then your gonna have to get new(twisted wedge) pistons...And my...
What type of shifter are you using? Maybe you need to readjust your stops.
The AFR 165's are very good heads and i would recommend them for a street car.I have them on my car and i'm very happy with my results....See Sig.
I just got a flywheel from spec..11lbs with the 50oz balance.
Try the 40/60 (stiff) setting and see what happens...The stiff setting will keep your slicks planted.