importance wise i would say water and oil are a must. wide bands are nice to have. if you want to know everything you can go crazy with oil...
good waxing and use quick detail in between washes.
ive never checked one,but if you have a known working distributor, just swap it in....
:stupid: you could try a distributor from a friends car. it will cost 20 minutes of time, $0 and check your tfi at the same time
the mounting points are probably different i would assume
are the injectors and maf new or used?
never done plugs on a 2.3. but is there anyway to get in there with a flex socket and extension?
these links may answer some questions and give you some ideas....
nice man. looks real clean
like jason said. make sure its fully seated. you should not have to struggle to turn the wheels.
nice trade! throw some subframes on her.
does it get worse as speed and rpm increase? what is it like at highway speeds?
what are your goals? do a search for other combinations and builds.
what do you mean grinded on? if the shoes that came out were down to bare metal i would get new drums, they are cheap enough. also lubricate all...
selling my flowmaster 2 chamber catback. inlcudes gt tails. all in good condition $100
please local only in phoenix AZ
email [email protected]
what trbkrb said. 1/2 inch breaker bar. be sure to get all the little things.... the c clips for the parking brake cable, save every bolt, lug nuts...
gears would be a nice addition to what you have listed.
efi tuning can take some time to understand.
think of it like this. the computer uses the 02 sensors to get close to a certain afr that you tell the...
thats your bell housing, where the engine and transmission come together. looks like what i call a seep not a leak. if you dont see lots of dripping...