did a 5 lug swap. Kept the drums, ranger axles. 98 Cobra wheels. As you can see, the wheel sits in.
well I have the option of 1"...
Should update this..whats going on it
Been a while, so I'll toss in an old picture of my 88
Car is currently on stands waiting a 5lug swap :)
I already have the box mounted and kill switch pretty much done. Only thing left is to run the wire back from the alt. I see I need to splice the...
try a parts store.
Yes. the fins need the air to pass through them. if they lay flat the rad will not work properly.
You can buy rad combs that straighten the fins...
i replaced my 02 sensors a month or so ago. im getting a code 42 & 92 saying im rich. i hooked a volt meter to the 02s to monitor what theyre...
The BAP sensor
AKA B1tch Ass Police sensor is located right above the dash near the rear view mirror, its usually plugged into the cigarette...
hmm, makes sense! Thanks!
Anyone ever have a Bap sensor go bad on them? What symptoms did you have that lead you to the bap?
And are the 2.3 bap sensors the same as the 5.0s?
thanks, ran the codes. got a 67, 81, 82 & 22 with koeo.
anyways i think its my optimizer. went back to 19lb injectors and stock maf and no poping.
not loosing coolent. umm, see the kicker is after the few minutes of crappy driving, it drives great! like its only a temporary thing.
Ok, just got my car on the road. had it out for a few drives, everything was great. So one day last week im on the highway, and i think i smell...
So i got my car running today. Swaped in my 24lb injectors. Pro-m recomends setting the idle voltage at .7-.9. Thing is at setting 1 its reading...
I need to get one of those seperators... that will tell me if I'm burning oil from tha PCV or if it is my valves leakin'
just install a clear fuel...
in case you dont know what the spout is.heres a pic. you can unplug the small tip of that connector.
loosen the distributer bolt, remove the spout...
Yeah, find a good local shop and decide what ya wanna do. basic rebuild or all out stroker...and welcome to the mustang hobbie!!
the B303 was the stock cam?